Common Issues and Solutions for PVC Flooring Installation

PVC flooring, as a modern, aesthetic, and durable ground decoration material, may encounter some common issues during its usage. This article will introduce to you the common problems of PVC flooring and their corresponding solutions, helping you better maintain and preserve your flooring.

Common Issues and Solutions

Split joint cracking 

The cracking phenomenon occurring at the seams affects the aesthetics and integrity of the flooring.

solutio

• Excessively large gaps can affect aesthetics and easily accumulate dirt, while excessively small gaps can cause the floor to buckle due to expansion and contraction. Generally, a gap of 2 to 5 mm is reserved.

• Re-weld the seams or use specialized glue for repairs to ensure the seams are firm and gap-free.

• After welding is completed, the weld seams should be inspected and trimmed to ensure the quality of the welds.

 Surface scratches or wear

Wear marks appear on the floor surface due to scratches or long-term high-traffic wear.

solution

• Shallow scratches may just be the accumulation of surface stains, which can be wiped off with a gentle cleanser and a soft wet cloth.

• If the scratch remains after wiping, use PVC repair paste to fill in the scratch and restore the floor's smoothness and aesthetics.

• For deeper scratches that have not penetrated the floor's wear layer, they can be sanded down with fine sandpaper and then filled with PVC filler.

• Lay protective mats in high-traffic areas to reduce wear and tear.

• Regularly wax and maintain the floor to enhance its wear resistance and gloss.

Fading or discoloration

The color of the floor fades or develops uneven discoloration patches.

solution

• Choose UV-resistant PVC flooring to minimize the impact of UV exposure on the floor's color.

• Avoid direct sunlight by using curtains or sunshades for shielding.

• Clean the floor with neutral cleaners and avoid using cleansers with corrosive chemical components.

• Regularly apply protective wax to safeguard the floor's color from damage.

Bulging or curling at the edges

The edges or certain areas of the floor experience bulging or curling.

solution

• Ensure that the ground base is free of oil stains, dust, or unevenness before laying, as these can affect adhesion.

• Check the ground humidity to ensure it is below 5% to prevent floor deformation caused by dampness.

• Re-lay the flooring and use reinforced adhesive to ensure a tight fit between the floor and the ground.

• Perform leveling treatment on the base to ensure the ground is flat and without undulations.

• Reserve sufficient expansion joints to accommodate the thermal expansion and contraction of the flooring.

• For small areas of unevenness or bulging, partially heat the area to soften the flooring, and then use a soft cloth or roller to press it down.

Stubborn stains

There are stubborn stains such as oil and paint on the floor surface that are difficult to remove.

solution

• Promptly wipe the stains with a neutral cleaner to prevent them from penetrating due to prolonged stay.

• For stubborn stains, alcohol or specialized cleaners can be used for treatment, but care should be taken to avoid soaking the floor.

• When dealing with stains, use a soft cloth or sponge, and avoid using hard objects or steel wool pads that may scratch the floor.

PVC flooring, as a high-quality floor decoration material, has been widely recognized for its aesthetics and durability. During its use, we still need to pay attention to its maintenance and promptly address any issues. Through the introduction in this article, I believe you have gained a deeper understanding of the common problems and solutions related to PVC flooring. I hope these suggestions will help you better maintain your PVC flooring.